Stages of work
If you have a radio with an anti-theft code, write down the code number before dismantling (Keycode).
Switch off the ignition, disconnect the battery.
Unlock the radio/cassette deck only with U-shaped wire corners. To do this, slide one corner 1 on each side into the holes provided for this purpose and press evenly outwards (see arrow). In this way, you will unload the mounting grips.
Carefully and evenly (without distortion) pull the radio out of mounting hole 2 with wire angles. This will prevent damage to the receiver's mountings.
Removing the radio
Disconnect the antenna wire, current connection, speaker plug connection and earth connection (see arrows), if necessary, mark for mounting.
Disconnect connectors
Mount the structural elements in reverse order.
Visitor comments