On versions with power windows, first disconnect the battery.
Remove the door lining as described above and carefully remove the sealing film in the rear area of the door, then fix with adhesive tape on the inside of the door.
unscrew the screw (arrow) on the castle drum.
Unscrew the screw on the lock drum
Carefully remove the outer lining of the lock drum with a small slotted screwdriver.
Pull back the outer door handle and remove the screw (arrow).
Unscrew the fixing screw in the door handle from the outside
Remove the door handle from the door to the outside.
Complete installation in reverse order.
Visitor comments