The electric window does not work (Focus Turnier 1)

Defective switch: Remove the switch on the other side and reposition the multi-pin connector. With a working switch, you should now be able to close the window.

No continuity in the wire to the electric motor: Run a jumper wire from the battery (if there is no positive current) or to ground (if there is no ground) to the window motor. Start the engine.

The engine is blocked: remove the door trim. Hang the glass on the lifting rail and press it firmly upwards. Fix the window in this position with strong adhesive tape or wedge it, for example, with a suitable piece of wood. Of course, both are only forced solutions.