- Disconnect the battery and then remove the inner lining of the outside rear-view mirror. Pull out plug 1 first and then unscrew screw 2.
Remove an internal facing of an external rear-view mirror. 1 plug, 2 screws. |
- Disconnect the mirror mechanism connector and remove the exterior mirror trim from the disc frame.
- Remove the door handle diaphragm. To do this, first remove the plug and then unscrew the screw located behind it.
- Remove the door handle trim and..
- ... unscrew both screws located behind it from the door.
- Remove the door trim by unscrewing all the screws (indicated by arrows).
Remove the door trim by removing all screws (arrows). |
- Disconnect the power window plug and remove the trim from the door.
- If you now need to remove the transparent film to get inside the door, then if possible do not grab the contact edges and adhesive surfaces: after that, the film may not adhere tightly enough again and rainwater may penetrate the door.
- Complete the work in reverse order and make sure that the film is tightly stretched around the edges. If not, then apply the silicone layer to the adhesive surface.
|
|
Visitor comments