Withdrawal
1. Remove the front door handle cover. To do this, insert a suitable tool into the specially provided hole and rotate the tool inside the hole.
2. Remove the screws.
3. Disconnect the door latch lock handle socket.
- 1. Remove the cap and remove the screw.
- 2. Remove the socket.
4. Remove a nest of the handle of blocking of a latch of a door.
- Disconnect the electrical connector.
5.
NOTE: Left hand drive vehicle shown, right hand drive similar.
Detach the cover.
- 1. Release the clip.
- 2. Disconnect the glass fastening chute.
6. Turn out screws of the panel of finishing.
7. Remove trim panel.
- 1. Turn the trim panel up.
- 2. Remove the trim panel.
Installation
1. To install, follow the removal procedure in reverse order.
Visitor comments