Withdrawal
All cars
1. Remove the front door handle cover. To do this, insert a suitable tool into the specially provided hole and turn the tool inside the hole.
2. Remove the screws.
3. Remove a socket of the handle of blocking of a latch of a door.
- 1. Remove the cap and remove the screw.
- 2. Lift and release the socket.
- 3. Remove the socket.
Vehicles with power windows
4. Remove a nest of the handle of blocking of a latch of a door.
- Disconnect the electrical connector.
Vehicles with power windows
5. Remove the window regulator knob.
- Use a suitable piece of wire.
All cars
6. Remove the inner window trim panel.
7. Turn out screws of the panel of finishing.
8. Remove trim panel.
- 1. Turn the trim panel up.
- 2. Remove the trim panel.
Installation
1. To install, follow the removal procedure in reverse order.
Visitor comments