'A' pillar trim panel — removal and installation

Withdrawal

1. Remove the side panel of finishing of the panel of devices.



2. Detach the pillar trim panel "IN".



3. Remove the pillar trim panel "A".

• Remove and discard body-mounted clips/sockets.

4. Disconnect the cell phone microphone electrical connector (in the presence of).



5.

NOTE: Mark the position of the microphone on the trim panel of the stand "A".

Remove the cell phone microphone from the stand trim panel "A".

Installation

1.

NOTE: Make sure the cell phone microphone is installed in the correct position.

NOTE: Install new body mount clips/sockets.

To install, follow the removal procedure in reverse order.