1. Remove the front door trim (see "Removal and installation the front door trim").
2. Remove the plugs of the two technological holes from the bases of the window regulator…
3. …temporarily connect the window lift control buttons and set the glass to the upper position, corresponding to convenient access to the mounting studs.
4. Holding the glass, unscrew the pins securing the glass to the window regulator through the technological holes.
Attention! Be careful: do not drop the glass mounting pins inside the door, otherwise, in order to get them out of the door cavity, you will have to remove the window regulator.
5. Remove the glass from the door by pulling it upwards and turning it in the door opening as shown in the photo.
Note: If the plastic glass mounting inserts are damaged, replace them with new ones.
6. Install the front door glass and all removed parts in the reverse order of removal.
(Information for this article was taken from the website: FORDBOOK.RU)