Removal and installation the rear door lock (Scorpio I) (Scorpio 2)

Models with a gently sloping rear end and TURNIER.

Removal

Open the back door.

Unscrew the fastening of the inner trim of the rear door, see previous chapter.

Unfasten the drive rods and disconnect the multi-pin plug connector of the magnetic switch.



Model with a gently lowering rear part of the body: unscrew the 4 bolts securing the lock and remove the lock from the rear door.



TURNIER: Remove 2 bolts with slotted heads "arrows" and remove the lock from the rear door.

Installation

Insert the lock into the rear door and screw it securely with bolts.

Hang up the drive rods and connect the multi-pin plug connector of the magnetic switch.

Place and screw the door trim.

(The original article is posted at FORDBOOK.ru)