Replacement of the left support of a suspension bracket of the power unit

You will need: keys «on 10», «at 18», end head «at 15», flat blade screwdriver.



1. Remove the battery tray mounting bracket (see «Removal and installation of an arm of the shelf of fastening of the storage battery»).

2. Place a secure support under the gearbox housing or hang the power unit with a lifting mechanism.



3. Unscrew the nut of the stud securing the left support of the suspension of the power unit to the bracket..



4.... unscrew the two nuts of the studs securing the support to the body..



5.... and remove the support from the car.

6. Install the left powertrain mount and all removed parts in the reverse order of removal.

Note. Pay attention to the marking of the support. Get a new support with the same marking.

Note. When installing the mount on the vehicle, orient it so that the serrated edge of the lugs of the mount pad (shown by arrow) was directed forward in the direction of travel of the vehicle.