Replacing the fuel filter (Fusion)

According to the manufacturer's recommendations, the fuel filter is replaced after 20 thousand km of mileage. However, taking into account the experience of operating cars in Russian conditions, we recommend replacing it every 10-15 thousand km of mileage. Jerks when driving a car, first at high speeds, and then at low speeds, most likely indicate a clogged filter.

The fuel filter is installed at the bottom of the body in front of the fuel tank, so it is more convenient to work on a lift or inspection pit.

1. Reduce the pressure in the fuel supply system (see "Reducing pressure in the fuel system").



2. Squeeze the clips and disconnect the fuel supply line tip from the filter.



3. Similarly, disconnect the fuel outlet pipe tip from the filter and remove the fuel filter.

Note: Before disconnecting the fuel line ends from the fuel filter, place a container underneath to collect any gasoline that leaks from the fuel lines and filter.

4. Install the new fuel filter in the reverse order of removal, so that the arrow on the cylindrical part of the filter housing coincides with the direction of fuel flow. Connect the fuel hose tips to the filter by moving along the fittings until the clamps snap into place.

Caution! After installing the fuel filter, be sure to check the fuel filter connections to the fuel lines for gasoline leaks while the engine is running. If necessary, repeat the operation of connecting the fuel lines until they are securely fastened. If leaks from the connections are not eliminated, replace the sealing rubber rings of the fuel line tips or the fuel lines as a whole.

The text of the article was copied from the website FORDBOOK.RU