You will need a flat-blade screwdriver.
1. Open the hood and place it on the support.
2. Remove the levers from the wiper linkage axles (see "Replacing windshield wiper arms").
3. On both sides of the air intake box grille, push out the clips of the pins securing the two decorative trims by prying them up with a screwdriver…
4. …and remove the pistons.
5. Lift the rear edges of the pads…
6. …remove their protrusions from the slots of the air intake box grille…
7. …and remove the pads.
8. Having lifted the edges of the air intake box grille, remove its fasteners from the holes in the body…
9. …and remove the grill.
10. Install the parts in the reverse order of removal.
The original source of this article can be found at [FORDBOOK.ru]