1. Use a screwdriver to move the spring lock of the handle through the gap between the window lift handle and its socket…
2. …and remove the window lift handle…
3. …and its socket.
4. Remove the inner handle trim by prying off its edge with a screwdriver…
5. ...and moving it forward and towards you.
6. Using a screwdriver, pry up the edge of the armrest trim…
7. …remove the cover, overcoming the elastic resistance of its clamps.
8. Remove the two bolts securing the armrest to the door panel.
9. Detach the trim from the door panel, overcoming the elastic resistance of the pins…
NOTE: The door trim (rear view) is attached to the door panel with seven plastic clips. Replace damaged clips with new ones by removing them from the trim brackets.
10. …and remove the upholstery.
11. Remove the seal from the window lift mechanism axle.
12. Install the rear door trim and all removed parts in the reverse order of removal.