1. Disconnect the wire from the negative terminal of the battery.
2. Remove the decorative corner trim insert, overcoming the elastic resistance of its fasteners.
3. Remove the inner lock handle trim by sliding it forward and towards you.
4. Using a screwdriver, pry up the edge of the armrest trim…
5. …remove the cover, overcoming the elastic resistance of its clamps.
6. Squeezing the clamps…
7. …disconnect the wiring harness connectors from the window lifter control units…
8. …and outside mirrors.
9. Remove the two bolts securing the armrest to the door panel.
10. Detach the trim from the door panel, overcoming the elastic resistance of the pins…
NOTE: The trim (rear view) is attached to the door panel with seven plastic clips. Replace damaged clips with new ones by removing them from the trim brackets.
11. …and remove the upholstery.
12. Install the front door trim and all removed parts in the reverse order of removal.