Adjustment of brushes and levers of windshield wipers

Special tool

Wiper arm alignment tool 501-027 (32-006)

Adjustment

1.

CAUTION: Make sure the wiper motor is in the off position.

Remove the wiper blade.

2. Insert the wiper arm into the special tool and install the special tool on the windshield.

3.

NOTE: All three legs of the special tool must be in contact with the glass.

Using the special tool, measure the angle between the wiper arm and the windshield.



4.

NOTE: When adjusting the angle, lift the special tool above the glass to prevent possible damage.

Using the special tool, check and adjust the wiper arm. For more information, please refer to the Specifications chapter available in this section.

• Using an open end wrench fitted to the special tool, adjust the angle.

5. Remove the special tool.

6. Install the wiper blade.