Contents: Removal ↳ Installation ↳
Removal
1. Remove the wiper blades (see Chapter 1).
2. Lift the suspended covers and remove the nuts and washers securing the wiper arms to the pivot shafts (see Figure 18.2).
Figure 18.2. Nut securing the windshield wiper arm to the pivot axis.
3. Mark the corresponding levers and axles to avoid mixing up the pairs when reinstalling, then remove the levers using a screwdriver as a lever. Be careful not to damage the car's paintwork.
Installation
4. Installation is carried out in the reverse order of removal.