Contents: Removal ↳ Installation ↳
Removal
Windscreen wiper arm and blade
1. Proceed in the same way as when removing and installing the windshield wiper arms and blades (see section 18). Pay attention to the original position of the wiper arm before removing it and make sure it is correctly positioned when installing it.
Windscreen wiper motor
2. Disconnect the negative battery cable, then remove the rear door trim panel as described in chapter 11, Section 9.
3. Remove the wiper arm and blades.
4. Disconnect the wiring from the windshield wiper motor.
5. Unscrew the fixing screws and remove the wiper motor.
Rear window washer reservoir
6. The procedure is similar to removing and installing the windshield or headlight washer reservoir (see previous section). To access the reservoir, remove the right rear interior trim panel as described in Chapter 11, Section 30.
Installation
7. Installation is carried out in the reverse order of removal. Once completed, check that the rear window washer is working properly.