Contents: Interior body lighting lamps ↳ Hazard warning switch ↳ Instrument cluster backlighting and… ↳ Gear selector lever illumination… ↳
Interior body lighting lamps
1. Insert the end of a small screwdriver into the recess in the lamp assembly, carefully pry the lamp assembly up and remove it (see Figure 15.1).
Figure 15.1. Insert the end of a small screwdriver into the recess in the lampshade assembly, carefully pry the lampshade up and remove it.
2. Press and unscrew the light bulb from the socket. The rear interior light has a festoon type bulb, and to remove it you just need to pry it off with something.
3. Install the new bulb in the reverse order of removal. Check the operation of the light bulb upon completion.
Hazard warning switch
4. Pull out the hazard warning light switch button and then remove the bulb (see Figure 15.4.).
Figure 15.4. Pull out the hazard warning light switch button and then remove the bulb.
5. Install the new bulb in the reverse order of removal. Check the operation of the light bulb upon completion.
Instrument cluster backlighting and indicator lamps
6. The procedures for replacing the instrument cluster backlight and indicator bulbs are described in Section 6 for models without a tachograph and in Section 9 for models with tachographs.
Gear selector lever illumination (automatic transmission)
7. Unscrew the two screws and lift the selector lever cover.
8. Twist the bulb socket counterclockwise to separate it from the cover.
9. Remove the light bulb from the socket.
10. Install the new bulb in the reverse order of removal. Check the operation of the light bulb upon completion.