Replacing the wiper rubber pad

Pull the wiper arm away from the glass.

Pull the wiper blade retaining spring off the lever until the notch is visible.

Press down the wiper blade and remove from the lever.

On one side, the rubber pad is fixed with two clips by the wiper blade. Press the bulges on the rubber pad with a screwdriver until the rubber pad comes out of the latches.

Then take out the rubber pad along with both metal spring strips in the other direction.

Take out metal spring strips from a rubber slipping of a screen wiper.

Install a new wiper pad in the reverse order.

When installing the wiper blade, make sure that the fixing spring engages with an audible sound in the grooves on the wiper arm. Check visually - otherwise with the next rain wiper blades «fly away» from glass.