Replacing the wiper blade rubber (Mondeo 3)

ORDER OF EXECUTION

Fold the wiper arm away from the glass.
Pull back the wiper blade retaining spring until the notch is visible.
Press the wiper blade down and remove it from the arm.
On one side, the brush fixes the rubber with two fastening brackets. Press the bulges on the rubber with a screwdriver until it disengages from the fastening brackets.
Now drag the rubber along with the two metal spring strips in the other direction.
Remove both metal spring strips.
Install the new wiper blade in reverse order.
Be sure to check that the retaining spring audibly enters the windshield wiper arm. Also perform a visual check - otherwise, during the next rain, the windshield wipers will "fly off" the glass.

Replacing the wiper blade: First, fold back the wiper arm, then remove the blade hinge from the small tab of the fuse. Now the blade can be moved along the U-shaped lever.

(The original can be found on the specified resource: «FordBook»)

Article reviewed: Herman Ostrovsky

« Previous articles
Filling the windshield washer with water
Checking the windshield wiper and washer
Glass washing machine
Removing large scratches
Polishing of small scratches

Next articles »
Installing a Windshield Washer Nozzle
Installation and removal of the windshield washer nozzle
Removing and installing the windshield wiper arm
Removing and installing the front windshield wiper motor
Removing and installing the rear wiper motor