Adjust the nozzles with a needle or paper clip. To do this, carefully insert the tip into the nozzle hole and turn it in the desired direction.
To achieve a good cleaning effect with a minimum amount of water, align the nozzles approximately to the upper third of the cleaning field.
Replacing the wiper blade: First, fold the wiper arm back, then release the wiper blade hinge at the small tab (arrow). Now you can slide the blade out of the "i" of the wiper arm.
Replacing the rubber wiper pad: 1 Wiper blade guide tabs. 2 Wiper rubber pad retaining clips. 3 Rubber pad guide profile. 4 Grooves for spring strips. T-tongue.
Adjustment of windshield wiper nozzles: The nozzles were separately aligned slightly higher - the water jet, even at increased speed (with the corresponding wind pressure), still hits the entire cleaning field.
(The material was copied from an information website: www.fordbook.ru)