Contents: Removal ↳ Installation ↳
Attention! The discs of both front brakes must have the same thickness and surface condition, only then will both wheels brake simultaneously. Therefore, it is recommended to replace both discs at the same time.
Removal
1. Remove the brake pads (see subsection 10.2.1).
2. In cars with a 2.0 dm³ engine, hang the caliper to the body using wire in order to protect the brake hose from damage.
3. Unscrew the caliper holder from the wheel knuckle.
4. Unscrew the screw securing the brake disc from the wheel hub and remove the brake disc.
Installation
1. Install the brake disc and tighten the screw that secures it to the wheel hub.
2. Screw the caliper holder to the wheel knuckle.
3. Install the brake pads (see subsection 10.2.1) and support (see subsection 10.2.2).
4. Install the wheels, lower the vehicle and tighten the wheel nuts.
5. Press the brake pedal hard several times to bring the brake pads into contact with the brake disc.
[The original can be found on the specified resource: www.fordbook.ru]