Fuel Switch Replacement

When the vehicle rolls over, the power supply switch to the fuel pump is activated and the fuel supply is cut off.



When the switch is activated, press the rubber cap located at the top of the switch.

Note. The emergency fuel shutoff button is only installed on vehicles with gasoline engines.

You will need: socket head «for 8», flat blade screwdriver.

1. Disconnect the wire from the terminal «minus» battery.



2. To access the fuel switch, open the glove box..



3.... pressing the walls with your fingers and removing the travel stops on both sides, fold the glove box.



4. Pry off the retainer with a screwdriver..



5.... and disconnect the block of wires from the switch.



6. Turn out two bolts of fastening …



7.... and remove the fuel supply switch.

8. Install the switch in the reverse order of removal.