Removal and installation of the switch (lock) of ignition

Switch (lock) ignition is mounted on the steering column and secured with two bolts with self-tapping heads, therefore, to replace it, it is necessary to remove the bolts with a chisel or drill with an electric drill. Switch (lock) it is more convenient to replace the ignition on the steering column removed from the car (see Removing and installing steering column).

You will need: a drill, an electric drill or a chisel with a hammer, pliers (better welding clamp), flat blade screwdriver.



1. Drill out the bolt heads from the left..



2….and the right side of the switch attachment to the steering column and remove the switch (lock) ignition assembly with a contact group.

USEFUL ADVICE: You can use a chisel and a hammer to remove the bolts securing the switch. Strike the head of the bolt with a hammer through a chisel tangentially counterclockwise, unscrew the bolts.

3. Install the switch (lock) ignition in the reverse order of removal.