Special tool
Digital multimeter 105-R0051 or equivalent | |
Electrical probe kit 29-011A |
Inspection and verification
1. Check the customer's complaint.
2. Perform a visual check for obvious signs of mechanical or electrical damage.
Visual Inspection Table
Electrical factors:
- Fuse (And)
- Wiring harness
- electrical connector (s)
- Switch (And)
3. If an obvious cause of the problem you identified or described by the client is found, eliminate it before proceeding to further actions (if possible).
4. If the cause is not visually obvious, check the symptom and refer to the Symptom Chart.
Symptom table
State |
Possible Causes |
Action |
•Headlight beam leveling does not work / does not work properly, normal headlights |
•Electrical circuit (And). • Lighting switch. • Electric motor of the corrector of an inclination of light of headlights |
• Go to PINPOINT TEST P |
• Headlight beam leveling does not work / does not work correctly, xenon headlights |
•Electrical circuit (And) •Light switch • Electric motor of the corrector of an inclination of light of headlights • Xenon headlight control module / headlight range sensor •Headlight tilt sensor |
• Go to PINPOINT TEST Q |
Visitor comments