Inspection and verification
1. Check the validity of the customer's complaint.
2. Perform a visual check for obvious signs of mechanical or electrical damage.
Visual Inspection Table
Electrical factors:
- Fuse (And)
- Wiring harness
- electrical connector (s)
- Switch (And)
3. If there is an obvious cause for the problem you identified or the customer described, fix it before proceeding with the next steps (if possible).
4. If the cause is not visually obvious, check the symptom and refer to the Symptom Chart.
Trouble symptom table
State |
Possible Causes |
Action |
• Headlight beam leveling does not work/works incorrectly |
•Electrical circuit (And) •Light switch • Electric motor of the corrector of an inclination of light of headlights |
• Go to PINPOINT TEST O |
Visitor comments