Floor console (cars up to 10.2001, manual transmission) (Focus 1)

Removal

All cars

1. Disconnect the ground cable from the battery. For additional information, refer to Section 414-01.

Cars with cell phone

2. Disconnect the cell phone handset holder from the floor console.



All cars

3. Remove the front floor console mounting screws on both sides.

• Remove the rubber mat from the cup holder.

4. Disconnect the gear shift boot from the floor console.



5. Disconnect the gear shift lever trim panel from the floor console.

• Disconnect the mounting clamps.

6. Remove the gear shift lever trim panel.

• Disconnect the traction control system electrical connector (if equipped).
• Disconnect the seat heating electrical connector(s) (if equipped).

7. Remove the insert from the rear of the floor console.



8. Remove the rear floor console mounting screw.





9. Raise the parking brake lever all the way and remove the boot.



Cars with cell phone

10. Disconnect the electrical connectors of the cell phone.

• Raise the floor console to access the electrical connectors.

All cars

11. Remove the floor console.

Installation

1. Install the elements back in place in reverse order.