B-Pillar and Reinforcement (3-Door) (Focus 1)

Name	Specification
Stand "B"
Seat belt mounting reinforcement panel
Inner rear side panel

Removal

1. General notes:

• Before starting repairs, remove the rear side panel and the lower trim panel.
• Move flooring and electrical wiring away from the work area.

2. External panel of the B-pillar

• Cutting points (through both panels).

3. Remaining flanges

• 1. Place of cutting.
• 2. Remove the remaining flanges.

4. Remaining flanges

• Place of cutting.

Installation

1. Inner rear side panel

• 1. Welding using MIG technology.
• 2. Perform puddling welding.

2. Stand "B"

• Before installing the new spare part, weld the seat belt mounting reinforcement panel.
• 1. Welding using MIG technology.
• 2. Perform puddling welding.

3.

CAUTION: Use sealed, porous, two-component material.

Soundproofing

• Fill the joint between the B-post and the bottom trim panel with foam.

[The text of the article was copied from the website FORDBOOK.ru]