Tightening torque specifications
| Name | Nm | pound-foot | pound-inch |
| Bolt securing the power steering line clamp to the steering gear | 23 | 17 | - |
| Steering gear heat shield mounting bolts | 6 | - | 53 |
| Tie rod end fastening nut | 47 | 35 | - |
| Lower arm ball joint to steering knuckle tie rod | 50 | 37 | - |
| Central bolt securing the engine support cushion to the gearbox in the block with the driving axle | 50 | 37 | - |
| Crossmember mounting bolts (M12) | 115 | 85 | - |
| Crossmember mounting bolts (M14) | 200 | 148 | - |
| Bolt securing connecting arm to anti-roll bar | 50 | 37 | - |
| Steering column shaft to steering gear pinion shaft | 28 | 21 | - |
Frame assembly
The front subframe is attached to the body with bolts and serves:
- as part of the supporting structure;
- for mounting the steering gear;
- for mounting the lower arms of the front suspension;
- for fastening engine mounts (engine mounts);
- for mounting the front anti-roll bar.
Visitor comments