Remove the top push pins
Raise the rear of the vehicle securely and secure the front axle with a wedge.
Unscrew the fixing bolts of the bumper lining in both wheel arches.
Unscrew the fastening nut 1 of the bumper on each side, behind the facing 2 of the wheel arch.
Remove the lower pressure pins of the bumper cover.
Lower the car.
Loosen the bumper nuts
Unhook the bumper trim and disconnect the fog light wire connectors.
Remove bumpers.
When installing, install all structural elements in the reverse order.
Align the bumper on the vehicle with a second person. Tighten the fixing nuts to 20 Nm.
With an assistant, align the bumper trim on the vehicle. Complete installation in reverse order.
Visitor comments