Gear lever
The gear lever is located on the floor of the car and can be set to seven positions.
P - parking (parking), R - reverse gear, N - neutral position, D - forward movement (automatic gear change from 1st to 3rd and back), 2 - automatic change of only the first two gears, 1 - movement only in 1st gear
Change lever position from position "N" on "R" or "R" requires it to be pushed in.
Driving under normal conditions
After starting the engine, press the brake pedal and move the gear lever to the position "D". When the brake pedal is released, the vehicle will move forward. While driving, the gears switch automatically from 1st to 3rd and vice versa, depending on the speed of movement and the position of the accelerator pedal. Gear shifting also occurs automatically as the speed decreases.
Maintenance and adjustment
The oil level in the automatic transmission should be checked and, if necessary, replenished every 20,000 km by an authorized service station. Gearbox controls should also be lubricated. Checking the oil level should be done with the engine warm, idling, gear lever in position "R" and at an oil temperature in an automatic transmission of 85°C.
Checking and adjusting the automatic transmission must be carried out every 40,000 km, and in case of using the car in difficult road conditions, correspondingly more often, at an authorized workshop.
Checking the oil level in the rear axle
The oil level in the rear axle should be checked and, if necessary, replenished every 20,000 km of the vehicle. The oil level should be level with the edge of the filler hole (N) and oil level control.
Visitor comments