Technical characteristics of the brake system
| Model | All except | TURNIER | 2.9 l, 24 valves |
| Front brake discs | |||
| Outer diameter, mm | 260 | 260 | 278 |
| Thickness of new brake disc, mm | 24 | 24 | 24 |
| Minimum brake disc thickness, mm1) | 22,2 | 22,2 | 22,2 |
| Rear brake discs | |||
| Outer diameter, mm | 253 | 253 | 273 |
| Thickness of new brake disc, mm | 10,15 2) | 20 | 20 |
| Minimum brake disc thickness, mm1) | 8.9 | 18 | 18 |
| Max lateral runout of all disks (installed), mm | 0,15 | 0,15 | 0,15 |
| Maximum thickness tolerance, mm | 0,015 | 0,015 | 0,015 |
| Minimum thickness of brake lining (excluding reverse side), mm | 2,0 | 2,0 | 2,0 |
1) After reaching this size, new brake discs must be installed. Particular attention should be paid to ensuring that after turning the brake discs, their thickness remains no less than the specified one.
2) For all-wheel drive vehicle: 10.5mm.