2. Unscrew the two screws securing the central section of the grille.
3. Remove the headlight washer nozzles by pulling them out of their holders.
4. Remove side section (arrow) grilles.
5. Remove the center section of the grille by lifting the lug (1) and turning it aside (2).
6. On later models, remove the levers (arrow) headlight cleaner. Unscrew the nuts and remove the levers from the axles.
7. Remove one end of the side section of the grille from the latches located behind the direction indicator lights. Carefully remove the side section from the seat until it separates from the center section.
8. Separate the center section from the second side section by lifting up on the latch that holds the section together.
9. Installation is made in sequence, return to removal.
10. At the same time, install the headlight cleaner lever on the splines of the axle, aligning it with the base of the headlight.
Visitor comments