Adjusting the front bumper installation height
1 – clamp nut, 2 – locking bolt, 3 – threaded sleeve, 4 – bumper, 5 – adjusting bolt
The front bumper installation height is adjusted using two adjusting bolts located in the front supports.
1. Use the Torx wrench to loosen the locking bolts.
2. Adjust the bumper to the required height by turning the 24 mm adjusting bolts with a replaceable head. The bumper height is adjusted correctly when the gap between its top and the lower edge of the side sections of the radiator grille is 7 mm.
3. After setting the front bumper height, tighten the lock bolts.