SEQUENCE OF WORKS
1. Open the hood and disconnect the negative battery cable. If applicable, disconnect the auxiliary fog light connectors.
Fig. 17.7. Removing the radiator grille and positioning the headlight mounting screws
2. Remove the radiator grille (Fig. 17.7).
3. Remove the headlights.
4. Raise the front of the vehicle and place it on stands. Apply the parking brake and chock the rear wheels.
Fig. 17.8. Location of the horn mounting bolt
5. Unscrew the horn mounting bolt (Fig. 17.8).
Fig. 17.9. Location of screws securing the mudguard to the front bumper
6. Remove the screws securing the mudguard to the front bumper (Fig. 17.9).
7. Disconnect the connector from the wing lamp.
Fig. 17.10. Location of bumper mounting bolts
8. Unscrew the bumper mounting bolts (Fig. 17.10).
9. Remove the bumper from the front of the vehicle.
10. With an assistant, install the bumper in the grooves, both edges of the bumper should be level with the fenders.
11. Tighten the bumper mounting bolts to 25 Nm.
12. Further installation is carried out in the reverse order of removal.