SEQUENCE OF WORKS
1. Use a screwdriver to remove the license plate light from the bumper.
2. Disconnect the connector from the license plate light.
Fig. 17.11. Location of the rear bumper mounting screws in the wheel arch
3. Remove the screw securing the rear bumper in the wheel arch (Fig. 17.11).
Fig. 17.12. Location of rear bumper mounting bolts from the trunk side
4. Open the trunk lid and remove the rear bumper mounting bolts from the trunk (Fig. 17.12).
5. Carefully remove the rear bumper.
6. Install the rear bumper and secure with bolts and screws.
7. Further installation of the wing is carried out in the reverse order of removal.
The original article can be viewed on the portal: www.FordBook.ru