Accessory drive belt tensioner — removal and installation

Withdrawal

All cars

1. Remove the accessory drive belt. For more information, refer to the Accessory Drive Belt chapter in this section.

Vehicles with 1.4L or 1.6L engine (100 HP)

2. Remove the accessory drive belt tensioner.



Vehicles with 1.6L engine (90 HP), 1.8L or 2.0L

3. Lower the car.

4. Turn out a bolt of fastening of a broad tank of system of cooling.



5. Disconnect the expansion tank of the cooling system and place it aside.



6. Disconnect the power steering fluid reservoir and place it aside.



7. Turn out bolts of fastening of a tensioner of a belt of a drive of accessories.



8. Raise and support the vehicle.

9. Remove the accessory drive belt tensioner.

Installation

1. Replace the elements in reverse order.