Front seat — removal and installation

Removal

1.

WARNING: Wait at least one minute after disconnecting the battery ground cable before disconnecting any supplemental restraint system electrical connectors. Failure to follow these instructions could result in personal injury.

Disconnect the ground cable from the battery. For additional information, refer to Section 414-01.

2. Move the seat all the way back.

3. Remove the outer decorative cover of the seat guide.



4. Remove the front mounting bolts.



5. Move the seat all the way forward.

6. Remove the rear mounting bolts.



7. Disconnect the electrical connector on the back of the seat.

Installation

1. To install, perform the removal procedure in reverse order.