Replacement of the metal-rubber bushing of the suspension beam

Fastening of the metal-rubber bushing of the rear axle beam

1. Raise and secure the rear of the vehicle.

2. Unscrew the 3 bolts securing the metal plate of the metal-rubber bushing of the rear axle beam to the body.



3. Using a suitable lever resting on the suspension arm, and using tool 15.014, remove the metal-rubber bushing from the seat of the rear axle beam.

4. Lubricate the new rubber-metal bushing with glycerine or an equivalent lubricant.

5. Using tool 15.017, install the metal-rubber bushing together with the gasket and nut in the seat of the rear axle beam.

6. Remove tool and remove lever.

7. Install the metal plate on the bushing and screw the three bolts securing the metal-rubber bushing to the rear axle beam (one locking screw) and to the body (two bolts).