Removal of air from the brake system

Placement of a vessel for collecting brake fluid when pumping the brakes

To bleed air from the brake system, the use of a device type ARC 50 is recommended.

1. Unscrew the cap of the brake fluid reservoir and screw the pipeline of the device in its place.

2. Connect the ends of the device to the deaerators of the brakes of all wheels.

3. Pressurize the brake system and bleed the hydraulic circuits of the front and rear brakes.

4. Check the tightness of the brake system.

Attention! In case of bleeding from the brake system without the use of a special device, it is necessary to bleed the air from the front brakes, and then from the rear ones.