Rear window washer pump: Unscrew the upper plastic screw securing the side trim of the luggage compartment and remove the side jack.
Prepare a new pump.
Windscreen washer pump or headlamp lens washer pump: Disconnect the multi-pin connector of the windscreen washer pump "D" or the headlamp lens washer pump "C" (see Fig. F-6035).
Rear window washer pump: Disconnect the rear window washer pump "C" multi-pin connector (see Figure F-6036).
Using a screwdriver, press the old pump away from the washer fluid reservoir. Close the opening in the reservoir with your finger. If necessary, remove the sealing gasket for the old pump. Finally, place the new pump with a new sealing gasket against the opening in the reservoir and press it into the opening.
Connect the hose supplying the washer fluid to the nozzles to the pump.
If necessary, top up the washer fluid level in the reservoir.
Check the operation of the washer pump.
Rear window washer pump: install the side jack, fold up the side trim and secure it with a plastic screw.
The original source of the publication is on the website www.fordbook.ru