SEQUENCE OF WORKS
1. Remove the headlights.
Fig. 15.26. Location of headlight lens mounting clamps
2. Use a screwdriver to pry up and remove the clamps located around the perimeter of the headlight lens (Fig. 15.26).
3. Remove the glass diffuser.
4. Remove the rubber gasket from the headlight housing and install a new gasket.
5. Install the new glass diffuser and secure it with clamps, starting from its middle.
6. Further installation is carried out in the reverse order of removal.
7. Check the headlight adjustment.
The material was copied from an information website www.FordBook.ru