Contents: Removal ↳ Installation ↳
Removal
Raise the rear of the car onto jack stands.
Use a screwdriver to detach the stabilizer at the top left and right from the connecting rod.
Unscrew the bolts securing the stabilizer clamps of the "arrow" and remove them from the splines in the body.
Remove the stabilizer assembly.
Remove the rubber mounts.
Installation
Place both rubber supports under the mounting clamps on the stabilizer.
Attach the stabilizer, push the clamps into the splines on the body and tighten the clamp mounting bolts to a torque of 25 Nm.
Attach the stabilizer on the right and left to the connecting rod.
Lower the car.