Withdrawal
1. Apply the parking brake. Raise the front of the car and place it on stands. Remove both front wheels.
2. Turn away nuts and disconnect connecting links of the stabilizer of cross-section fluctuations from racks of a suspension bracket. Please note that on models with ABS, the ABS sensor wiring bracket is installed under the nut (see fig. 6.2, a, b).
3. Remove the anti-roll bar mounting bolts from the engine subframe on both sides of the vehicle (see fig.6.3).
4. Pull out the stabilizer from one side of the car so as not to damage adjacent components.
5. If necessary, unscrew the nuts and remove the connecting links from the stabilizer.
Installation
6. Installation - in the reverse order of removal.
Visitor comments