Contents: Removal ↳ Installation ↳
Removal
Press the plug from the inner lining of the mirror and unscrew the mounting screw located underneath it.
Unscrew the 3 mounting screws from the interior side. While doing this, hold the mirror from the outside with your hand, and then remove it.
Electrically operated mirror: Disconnect the plug connector.
Installation
The mirror wiring harness or manual drive mechanism must be fed from the outside through the hole in the door leaf.
Place the outside mirror and screw it securely with three screws.
Electrically operated mirror: Connect the plug connector.
Screw on the cover plate and close the hole for the screw with a plug.
The article was taken in its entirety from the specified website www.fordbook.ru