Models with catalytic converter
Warning! The HEGO sensor is a very delicate and sensitive device and can be damaged by impact or power failure. Do not touch the tip of the sensor with bare hands.
1. Remove the ground wire from the battery.
2. Raise the front of the car.
3. Remove the connector from the sensor, having first released the fasteners.
4. Remove the heat shield from the sensor.
5. Unscrew the sensor from the exhaust pipe and remove the sealing ring.
6. Installation is carried out in the reverse order of removal, and it is necessary to install a new sealing ring.
This article was borrowed from the website [www.fordbook.ru]