Replacing the metal-rubber bushing of the rear axle beam

1. Raise and secure the rear of the vehicle.



2. unscrew the bolts (1) body mounts and clamps (2) metal plate of the metal-rubber bushing of the rear axle beam.



3. Using a suitable lever resting on the suspension arm and tool 15.014, remove the metal-rubber bushing from the seat of the rear axle beam.

4. Lubricate the new rubber bushing with glycerin or an equivalent lubricant.

5. Using tool 15.017, install the metal-rubber bushing together with the gasket and nut in the seat of the rear axle beam.

6. Remove tool and remove lever.

7. Install the metal plate on the bushing and screw the three bolts securing the metal-rubber bushing to the rear axle beam (one locking screw) and to the body (two bolts).

8. Lower the car.