1 - Cross beam of the rear suspension; 2 - Guide holes. For the exact location of the beam on the bottom of the body; 3 - Rear transverse suspension arm; 4 - Eccentric bolt/nut for track adjustment; 5 - Cross beam suspension Limousine 4x4; 6 - Guide pin (4x4). For the exact location of the beam on the bottom of the body; 7 - Front transverse arm; 8 - Jet rod; 9 - Axis trunnion; 10 - Shock absorber
Attention! To avoid damage, do not lean the vehicle on the rear suspension beam.
Elements of the rear wheel suspension guide system are mounted on a separate frame (cross beam). Two lower transverse arms and shock absorbers on both sides transmit lateral forces from the wheels to the body, long jet rods perceive longitudinal loads (braking forces). An optional anti-roll bar adjusts body tilt when the vehicle is cornering. With the 4x4 version, the design differs only in the presence of an additional rear axle differential mounting beam. This part is also completely shielded from the body by mounting on rubber elements.
Visitor comments