Replacing the ABS sensor (front wheels) (Mondeo 2)

The ABS sensors on the front wheels are located on the steering knuckle. Replace the sensors as follows:

- jack up the front of the car to gain access to individual parts, remove the front wheel;



Fig. 274. Location of the front wheel ABS sensor

- unscrew the sensor mounting bolts on the steering knuckle, carefully remove it from the steering knuckle at the mounting location shown in Fig. 274;

- through the free hole, release the sensor cable mount and disconnect the plug connector;

- check if the sensor mounting hole and the sensor itself are dirty.

Install in the reverse order of removal. After assembly, check the functionality of the ABS.

The text of the article was copied from the website FORDBOOK.ru