MT285 Manual Transmission Specifications

            0

Lubricants, fluids, sealants and adhesives


PositionSpecification
Transmission Fluid for Manual TransmissionWSD-M2C200-C

Fill volumes


l
Transmission Fluid for Manual Transmission (to a level below the lower edge of the filler hole (level check holes))1.7

Gear ratios


BroadcastGear ratio
1st12.789
2nd7.793
3rd5.651
4th4.615
5th3.828
6th3.126
Reverse11.944

Torque Specifications


NameNmlb-ftlb-in
Bolts for fastening the gearbox housing in the block with the drive axle4835-
Starter mounting bolts3526-
Nuts of fastening of an intermediate support of a semiaxis2518-
Bracket of the rear engine mount to the gearbox in the block with the drive axle8059-
Nuts of fastening of a back support of the engine (four nuts)4835-
Nut of fastening of the center of a back support of the engine13398-
Nuts securing catalytic converter to exhaust manifold4735-
Flexible connection of the exhaust system to the exhaust pipe, complete with muffler4735-
Catalytic Converter Support Bracket Bolts2518-
Bolts of fastening of a basic arm of cables of a gear shift to a case of a transmission in the block with a leading axle2015-
Nut of fastening of the spherical hinge of the lower suspension arm5037-
Nut of fastening of a tip of steering draught4735-
Nuts of fastening of the top support of a rack in gathering with a spring2518-
Transmission Fluid Drain Plug4533-
Transmission filler cap4533-







Link to this page in different formats
HTMLTextBB Code


Visitor comments


No comments yet



Focus 2 
Focus Turnier 1 
Focus 1